2 Demountable Oars 160cm with aluminium shaft and nautical plastic blade
Modular system Oars consisting of an aluminium shaft and a marine plastic blade. The idea is providing paddle easy
to stow and carry, demountable, as well as efficient when paddling and extra light. With only 700 grams and a large
resilient blade they provide an excellent propeller function to any boat. Two pieces paddles, specifically designed
for Bengar inflatable boats, with a diameter of 35mm they fit on any "made in Ukraine" boat.
Ideal to be stowed when not necessary. A gummy hand-grip and the light weight of the oar offer you the maximum rowing comfort and performances.
2 Rowlocks/Oarlocks for inflatable boat
Heavy duty row-locks specific for inflatable boat and dinghy consisting in a PVC base, to be glued on the boat, and an iron steel pin (4cm long and 1cm large) to lock the row. The iron pin has a large PVC screw cap on the top to secure the oar. This oar lock has an inside mechanism that allows the row to swing on a side when not in use, and, in combination with Row-Clips, maintains the row along side the boat during the navigation with engine or transport of the boat itself.
2 x Oar/Row Clips for inflatables PVC boats
Bengar row clips (2 pieces) in black is the ultimate Clip to keep your oars in position alongside the boat when
you don't need them. Ideal paddle clips for rows with a shaft of 35 mm diameter, maintains the oars in place during
the navigation or the transport of the inflatable boat.
We provide all our Bengar inflatable boats with this technical item since years and we tested it under any condition: we are so happy about it that we offer this solution to keep always the paddles in position on water or land transport.
They come with a specific glue template to perfectly install them, usually alongside the dinghy. The perfect solution for inflatable boats, inflatable kayaks and inflatable canoes.
Professional 2-components glue for PVC inflatable boats - Kit
This Kit is enough to paste 8 Row Locks.
This professional adhesives is the same we use to manufacture our inflatable crafts. The glue is specifically developed for nautical purposes and extremely easy to handle or use. An absolute must for a perfect, durable and resilient reparation of any inflatable PVC boat or the new installation of any boat equipment you could need on your PVC inflatable dinghy.
Starting from now the installation of new fishing and navigation accessories on your inflatable boat, from navigation lights to rod holders or maybe new adjustable seats, is really a simple job.
This adhesives is developed to paste PVC to PVC, PVC to metal and PVC to wood. This user friendly product allows you to install any nautical equipment directly on the boat in a matter of minutes. PVC Glue 50 ml + PVC Glue Hardener 50ml = 100ml Specific PVC Glue.
|Length of your inflatable||Ex. Bengar Boat||Row Dimension|
Instruction for Glueing
This instruction is created to explain how to attach various equipment to your boat by using our Bengar Montage Kit. The kit includes glue, thinner, duct tape and a brush.
Step 1: Mark and Mask
Hold the equipment you want to attach against the boat and mark the space you will need with a water-based felt marker. Mask this particular space afterwards with the duct tape. Be aware to mask 0,3-0,5 cm more than you actually marked. Clean the marked spaces and and erase the marks.
Step 2: Preparation and Glueing
First of all open the glue with a slotted screwdriver. If the glue is to viscous, please use the enclosed thinner to ensure a perfect consistency. The glue evaporates quickly so you will have to use the thinner a few times, as soon as you realize that the glue is to viscous again. Lay on a first layer of glue on the marked spot on your boat and on the equipment you wish to glue by using the enclosed brush. The best way to do it is by spreading it from in- to the outside so all edges are glue-brushed. Leave it then to dry for about 15 - 20 minutes. The brush should always be kept in the glue or thinner otherwise it will harden. Don't leave the glue or thinner open or uncovered. Close it even during small breaks. Afterwards spread a second layer of glue and remove the duct tape. Lave it to dry for another 5 minutes.
Step 3: Warming and Glueing
Use a hot air gun on the maximum power level to heat up the space where you want to glue on the boat and the equipment for about 30 seconds. Take care of not holding it too long on one spot, otherwise the material could get burned. Our tip: move the hot air gun constantly so it ain’t going to stay longer on one spot than it should. You can also use a hair dryer but you have to pay attention that the spaces you want to glue become warm enough. Be aware of the fact that as soon the booth parts get connected, it will be impossible to reattach it again. After the glueing of the equipment to the boat you should use a little drum or bottle to roll over the glued space to avoid air bubbles and make sure it is connected perfectly.
Step 4: Drying Period
Now you should leave the boat to dry for at least 24 hours so the glue can harden. Leave the glued space smooth and even. If you fold the boat while the drying period it could happen that the equipment hardens in an buckled position.
In Scope of Delivery
- 2 x Aluminium shafts
- 2 x Paddle Blades
- 2 x Rowlocks
- 2 x Row Clips
- 4 x glueing Templates
- 1 x Glue
- 1 x Glue Hardner
- 1 x Brush
- 1 x Tape
|Product Weight||2.1 kg|
|Delivery time||3-5 Days|