High pressure air valve for inflatable boat, kayak and canoe
High pressure air valve for inflatable boat with 21mm diameter to suit inflatable floor and tube. After years researching the best air- valve we are eventually proud to recommend this essential spare part. The best solution to have always your inflatable PVC boat perfectly inflated as long as you need. No matters if you keep your boat in a garage or docked in a marina, this is the solution to find your inflatable boat always inflated at the same pressure: ready to go.
How to mount an Air Valve on an inflatable boat
Our Valves are directly screwed into the air chambers. This grant a constant air pressure as well as an easy
change in case of failure.
The valve consists of two parts. The inner thread, which is already installed in the hose and the actual Valve. When you buy it, you get both parts. The female side will remain in the air chamber and will be replaced just the valve itself.
To release the valve, you will need a suitable valve key (You will find this in our Onlineshop).
Turn the valve counterclockwise holding in place the inner part.Please pay attention to the inside part of the valve during this operation. Once unscrewed the old valve is enough to screw with your hand the new valve.
Use the valve wrench to re-tighten the new valve clockwise. Then check with a mixture of water and soap, to check for air leak. If no bubbles are visible, it is tightly fixed.
In Scope of Delivery
- 1 x Air Valve
|Delivery time||3-5 Days|
|Mounting||No assembly required|