Set: Adjustable Seat/Bench for inflatable boats and dinghies
A combination of boat accessories to provide a stable but adjustable seat bank on any inflatable boat. This set contains everything you will need to fix on your inflatable dinghy a stable solution to seat you or your passenger on board. We adopted this solution for our Nexus inflatable boats, and has be proven their stability and durability over the last years. Everybody who wants to upgrade his stationary seat to an adjustable one, has now the perfect tools for it. Just glue the tracks to the inside of the PVC boat (if different material a suitable glue is required) and set in the bench through the specific tracks-holders. This solution provides about 30 cm adjustable space for your seat bank. No more loosening, slipping or dropping of the seats itself!
The Set comes with Spax stainless steel fasteners and with PVC tracks in different colors.
1 x Plywood Seat board 69x20x1.5 cm
We proudly present our line of plywood bench for inflatable boats made to be resilient and resistant under any condition like salty water, sun, acid rain etc. Extreme attention to the details, like round border and transparent protective paint, is the final touch in the production of any Bengar spare part. They are designed on the Bengar inflatable boats, but they fit to any dinghy from 2 up to 4 meters length./p>
We offer this combination in different length for boats from 2 up to 6 Meters long:
Dimension: 62x20x1.5 cm, for 110-120 cm broad inflatable boat
Dimension: 69x20x1.5cm, for 120-135 cm broad inflatable boat
Dimension: 73,5x20x1.5cm, for 135-145 cm broad inflatable boat
Dimension: 95x20x2.1cm, for 145-170 cm broad inflatable boat
Dimension: 105x20x2.1cm, for 170-200 cm broad inflatable boat
2 x Track Holders
Once fixed this support to a seat (or to an echo-sound mount) it's enough to let slide into it our PVC tracks in order to fix the desired equipment to any inflatable boat. This system has been proven over the last years, showing off many advantage: your equipment is at the same time stable and adjustable on your inflatable boat. With a weight of only 122g it's a great enhancement to fix a variety of equipment to any inflatable PVC boat. Necessary is a rigid surface where to fix the support with screws to your equipment.
Diese Möglichkeit an Halterungen verwenden wir bei unseren Echolothalterung
2 x PVC Tracks for Fastening 40cm
Our PVC racks are designed to be glued on the boat and in combination with our PVC track support they make any equipment stable but adjustable on the boat. This convenient and light solution is ideal to make your boat more comfortable and light at the same time. Another advantage of this product is that once you fold your boat it won't keep extra space. Extremely light solution to make your accessories on board movable but firmly fixed to your inflatable boat.
Professional 2-components glue for PVC inflatable boats - Kit
This professional adhesives is the same we use to manufacture our inflatable crafts. The glue is specifically developed for nautical purposes and extremely easy to handle or use. An absolute must for a perfect, durable and resilient reparation of any inflatable PVC boat or the new installation of any boat equipment you could need on your PVC inflatable dinghy. Starting from now the installation of new fishing and navigation accessories on your inflatable boat, from navigation lights to rod holders or maybe new adjustable seats, is really a simple job.
This adhesives is developed to paste PVC to PVC, PVC to metal and PVC to wood. This user friendly product allows you to install any nautical equipment directly on the boat in a matter of minutes.
PVC Glue 50 ml + PVC Glue Hardener 50ml = 100ml Specific PVC Glue.
Instruction for Glueing
This guide is created to explain how to attach various equipment to your boat by using our Bengar Montage Kit. The kit includes glue, thinner, duct tape and a brush.
Step 1: Mark and Mask
Hold the equipment you want to attach against the boat and mark the space you will need with a water-based felt marker. Mask this particular space afterwards with the duct tape. Be aware to mask 0,3-0,5 cm more than you actually marked. Clean the marked spaces and and erase the marks.
Step 2: Preparation and Glueing
First of all open the glue with a slotted screwdriver. If the glue is to viscous, please use the enclosed thinner to ensure a perfect consistency. The glue evaporates quickly so you will have to use the thinner a few times, as soon as you realize that the glue is to viscous again.
Lay on a first layer of glue on the marked spot on your boat and on the equipment you wish to glue by using the enclosed brush. The best way to do it is by spreading it from in- to the outside so all edges are glue-brushed. Leave it then to dry for about 15 - 20 minutes. The brush should always be kept in the glue or thinner otherwise it will harden. Don't leave the glue or thinner open or uncovered. Close it even during small breaks. Afterwards spread a second layer of glue and remove the duct tape. Lave it to dry for another 5 minutes.
Step 3: Warming and Glueing
Use a hot air gun on the maximum power level to heat up the space where you want to glue on the boat and the equipment for about 30 seconds. Take care of not holding it too long on one spot, otherwise the material could get burned. Our tip: move the hot air gun constantly so it ain’t going to stay longer on one spot than it should. You can also use a hair dryer but you have to pay attention that the spaces you want to glue become warm enough. Be aware of the fact that as soon the booth parts get connected, it will be impossible to reattach it again. After the glueing of the equipment to the boat you should use a little drum or bottle to roll over the glued space to avoid air bubbles and make sure it is connected perfectly.
Step 4: Drying Period
Now you should leave the boat to dry for at least 24 hours so the glue can harden. Leave the glued space smooth and even. If you fold the boat while the drying period it could happen that the equipment hardens in an buckled position.
In scope of delivery
- 1 x Seat Bench
- 2 x PVC Tracks 40 cm long
- 2 x Track holders
- 8 x Spax stainless steel screws
- 1 x Glue
- 1 x Thinner
- 1 x Brush
- 1 x Duct Tape
|Size||L280 69 cm x 20 cm|
|Delivery time||3-5 Days|
|Product Weight||1.85 kg|