Rod holder or mobile phone holder incl.
Your dinghy comes equipped with a mount system that can host interchangeable accessories on the boat. During the ordering process you can choose for free between a fishing rod holder or a cell phone holder. You can also purchase any other accessory from our Railblaza catalog, attach it, fix it and replace it as desired. You can find the whole range of products here.
A soft Rod/Pole Holder on the Boat
We provide every inflatable boat with a vertical PVC pole/holder. Ideal accessory for laying the fishing rod from the hand. The rod then stands vertically in the inside part of the boat and due to the construction material, it doesn't reduce the on-board comfort. On the contrary its flexible shape and elasticity allows you to use this piece of equipment for landing nets, pliers or beach umbrella. Internal diameter 3.8 cm.Details
Holding system for bow bags and bow canopies
Around the bow of your dinghy you will find 9 small knobs. These knobs, already installed on any Bengar inflatable boat, provide a holding system to fix bow bags, bow canopies or anything you need to fix and secure on board. This is a fixing system that works with any strap you need to fix on your inflatable boat. Your tender is ready to be customized as you like.
Light as a feather
This is our Lotus. The dinghy has been designed to be transportable by a single person. Thanks to the use of the best PVC on the market, PVC Valmex Boat 7318, the 37 kilos are well spread over the 320 cm length keeping a resilient PVC boat as always, even though we are using a material with 1000 Decitex.
Only 1,2 Meter, it'll fit in every trunk
Our folded boat fits in every trunk and is easy to carry from A to B.Details
Firm floor with high quality Marine Plywood
The Lotus has a solid, slatted floor which ensures great stability on the water. But this stability is not a coincidence. We use for our floor the best Marine Plywood available. Generally it is known as an expensive material, and in contrast to chipboard it as great resistance to water, salt and sun. It’s manually refined before to be finished impregnated with a special liquid. Do you want to see a video of it! Click here!
The special feature is the bulkhead partition
The three bulkhead partitions of our Lotus contribute to regulate the air pressure in the whole dinghy. If one chamber has not the sufficient amount of pressure, it will receive more volume by the adjacent one to maintaining a uniform pressure on all the inflatable boat. Details
The Lotus 320 is made of a 5-layered, fabric-reinforced PVC material, "Made in Germany", with a thickness of 0.8 mm (1000 Decitex). This means that one square meter of our material weighs 1000 grams. The exterior of the Lotus 280 is therefore largely resistant to UV light, oil, salt water and abrasion. The exact name: VALMEX® 7318 Mainstream. Order a free sample
Instead of glueing the layers one next to the other, here at Bengar the PVC is overlapped. This extensive and expensive procedure leads to less air leaks and to a more resilient craft. Details
Free of charge installation of accessories on your inflatable
Each accessory ordered in combination with a dinghy is assembled free of charge from us on your inflatable boat. After the purchase we will send you a sketch with the suggested spot for your accessories. If you like it, the accessories are installed on the inflatable according to the sketch. Otherwise we will change the sketch following your directives until it meets your requirements. Details andExample.
Double holds better
The outer PVC layers of our boats are not just patched from outside, but also from inside at the same time. This is the best construction way to prevent any air leak.
This boat has been independently tested by the Skipper Magazine (Article in German)!
"Light and easy to transport in the car trunk, uncomplicated to set up and still very cheaply priced. These are the typical features of the Bengar L-320, which we have tested for you." Source: Peter Marienfeld: "Bengar L-320 Gummi-Floh", Skipper Wassersportmagazin, September 2015,Read the TEST
In Scope of Delivery
|Max engine weight||50 Kg|
|Suitable for salt water||Yes|
|Delivery time||3-5 Days|
|Diameter of the tube||40 cm|
|Hull||1000 Denier Valmex 7318 0,8 mm|
|inside width||66 cm|
|length inside||228 cm|
|Max. load capacity||470|
|Maximum Power Allowed||4-10 Ps|
|personal number||4+1 (child)|
|Handles||Yes (2 rear 1 front)|