Handle/Grip for inflatable boat transport + PVC Glue Kit

Availability: In stock

Regular Price: €32.00

Special Price: €30.00

Incl. 19% VAT, Excl. shipping
Delivery time 3-5 Days
Shipping -GER : 4,90 €
OR
HANDLE WITH GLUE FOR INFLATABLE PVC BOATS

More Views

  • Bengar handle grip for inflatable kraft
  • Bengar PVC lifting handle cleat
  • Bengar handle point for inflatable boat
  • Hand grip handle for inflatable PVC rib boat
  • PVC handle for inflatable kraft
  • Handle - Bottom side to glue on PVC boat
  • Handle for RIB boat
  • Bengar Handle with dimension
  • Wie eine Griffe auf Schlauchboote montieren

Videos

Product Description

Handle/Grip to transport/handle/move inflatable boats by Aqua

To lift, move or just take your inflatable boat to, and from, water we supply this PVC handle. It's a resilient handle up to 100 kg tested, that offer a comfortable grip to to any inflatable kraft. This grip is a very useful boat equipment, which makes it easier to handle your inflatable boat.
We suggest to place a couple of these Handles on the side of the boat or on the internal side of the boat backboard (the poop of the boat) to provide an easy lifting solution that a single man can use to lift the back part of the inflatable boat. We equip our Lotus model L-320 inflatable boat with this solution showing over the years its efficiency.
We offer now a slimmer version of this handle with the same technical specs.  

Professional 2-components glue for PVC inflatable boats - Kit

This professional adhesives is the same we use to manufacture our inflatable crafts. The glue is specifically developed for nautical purposes and extremely easy to handle or use. An absolute must for a perfect, durable and resilient reparation of any inflatable PVC boat or the new installation of any boat equipment you could need on your PVC inflatable dinghy. Starting from now the installation of new fishing and navigation accessories on your inflatable boat, from navigation lights to rod holders or maybe new adjustable seats, is really a simple job.
This adhesives is developed to paste PVC to PVC, PVC to metal and PVC to wood. This user friendly product allows you to install any nautical equipment directly on the boat in a matter of minutes. PVC Glue 50 ml + PVC Glue Hardener 50ml = 100ml Specific PVC Glue.


Instruction for Glueing

This instruction is created to explain how to attach various equipment to your boat by using our Bengar Montage Kit. The kit includes glue, thinner, duct tape and a brush.

Step 1: Mark and Mask

Hold the equipment you want to attach against the boat and mark the space you will need with a water-based felt marker. Mask this particular space afterwards with the duct tape. Be aware to mask 0,3-0,5 cm more than you actually marked. Clean the marked spaces and and erase the marks.

Step 2: Preparation and Glueing

First of all open the glue with a slotted screwdriver. If the glue is to viscous, please use the enclosed thinner to ensure a perfect consistency. The glue evaporates quickly so you will have to use the thinner a few times, as soon as you realize that the glue is to viscous again. Lay on a first layer of glue on the marked spot on your boat and on the equipment you wish to glue by using the enclosed brush. The best way to do it is by spreading it from in- to the outside so all edges are glue-brushed. Leave it then to dry for about 15 - 20 minutes. The brush should always be kept in the glue or thinner otherwise it will harden. Don't leave the glue or thinner open or uncovered. Close it even during small breaks. Afterwards spread a second layer of glue and remove the duct tape. Lave it to dry for another 5 minutes.

Step 3: Warming and Glueing

Use a hot air gun on the maximum power level to heat up the space where you want to glue on the boat and the equipment for about 30 seconds. Take care of not holding it too long on one spot, otherwise the material could get burned. Our tip: move the hot air gun constantly so it ain’t going to stay longer on one spot than it should. You can also use a hair dryer but you have to pay attention that the spaces you want to glue become warm enough. Be aware of the fact that as soon the booth parts get connected, it will be impossible to reattach it again. After the glueing of the equipment to the boat you should use a little drum or bottle to roll over the glued space to avoid air bubbles and make sure it is connected perfectly.

Step 4: Drying Period

Now you should leave the boat to dry for at least 24 hours so the glue can harden. Leave the glued space smooth and even. If you fold the boat while the drying period it could happen that the equipment hardens in an buckled position.


In Scope of Delivery

  • 1 x Handle

Technical Data

Part Number HG-K9
Barcode 0700736970522
Made in Ukraine
Weight 0.41 kg
Product Weight 0.26 kg
Delivery time 3-5 Days
Manufacturer Aqua
Mounting Glue
Material Soft Plastic
Color Black
  • Handle/Grip for inflatable boat transport + PVC Glue Kit
  • Price: €30.00 - In stock
  • Brand: Aqua
  • Color: Black

Please wait...

{{var product.name}} wurde in den Warenkorb gelegt


Continue shopping View cart & checkout Jetzt bezahlen

{{var product.name}} wurde aus dem Warenkorb entfernt


Continue shopping View cart & checkout
Um Ihnen einen optimalen Service auf unserer Webseite zu bieten, verwenden wir Cookies zur Verbesserung der Funktionalität sowie zu Analysezwecken. Durch die weitere Nutzung dieser Webseite erklären Sie sich damit einverstanden. Weitere Details zu den eingesetzten Cookies, ihrer Verwendung und zur Änderung der Cookie-Einstellungen finden Sie in unseren Hinweisen zum Datenschutz.