Set: Rod Holder II + Ribport + Glue Kit, Railblaza boat equip. Black 03-0007-11

Availability: In stock

Regular Price: €65.00

Special Price: €58.00

Incl. 19% VAT, Excl. shipping
Delivery time 3-5 Days
Shipping - GER : 4,90 €
OR
Star holder with Rod mount with PVC Montage Kit

More Views

  • Rot Holder on rubber dinghy
  • Rubber dinghy with mount Rod and base
  • Holder for fishing rods
  • Rod Holder on a fishing rib boat assembled on rail
  • The fishing rod mount installed on speed boat
  • Rod holder on a fishing rib boat
  • Rod holder glued on a fishing boat
  • Ribport mount drawing
  • Rod holder drawing
  • Instruction for Glueing
  • Boats accessories catalog

Videos

Fishing Rod Holder for boats


Product Description

Railblaza Rod Holder II Black - Fishing equipment for boats and inflatables.

With this fishing rod holder you can rest and relax during all your fishing trips.
Perfectly designed to let your hands free, it allows you fishing with several rods at the same time without encountering any complication. The rod holder is Fully adjustable 360° around and over 90° vertically. Thanks to a retractable stopper in the bottom side, you can let your fishing rod sliding in the Rod Holder (for fast fishing) or let it open and set securely your rod into it (to prevent to loose you rods while fishing). This rod holder is suitable for all common rods and rollers.


It is possible to hold very large rods (up to 36mm), which are mainly used in salt water. Are you a river or lake fisherman with fine rods? Then there is a slightly smaller version which is even cheaper:

Rod holder R - for lakes and rivers

Ribport - Universal Black mount for boat equipment to be glued on inflatable boats.

This mount for Railblaza accessories has been specially developed for inflatable boats. This mount must be pasted on the tube of your inflatable boat. For this purpose we offer a glue kit that guarantee the best result and it's enough to paste up to 8 Ribports. Alternatively, you can use the VHB pad from 3M, a double-sided glue tape. We suggest this solution only when the Ribport is installed and dismantled regularly.
Mounting a rod holder, or any accessory you could need on board, was never so easy: this mount can host any device holder without having to go to a repair shop.
The RIBPort is a star-shaped mount that can hold hold and lock any RailBlaza accessory. Paste it under the guidance of our glue guide or get a free installation buying a Bengar inflatable boat.

Professional 2-components glue for PVC inflatable boats - Kit

This professional adhesives is the same we use to manufacture our inflatable crafts.
The glue is specifically developed for nautical purposes and extremely easy to handle and use. An absolute must for a perfect, durable and resilient reparation of any inflatable PVC boat or the new installation of any boat equipment you could need on your PVC inflatable dinghy.
Starting from now the installation of new fishing and navigation accessories on your inflatable boat, from navigation lights to rod holders or maybe new adjustable seats, is really a simple job.
This adhesives is developed to paste PVC to PVC, PVC to metal and PVC to wood. This user friendly product allows you to install any nautical equipment directly on the boat in a matter of minutes.
PVC Glue 50 ml + PVC Glue Hardener 50ml = 100ml Specific PVC Glue.


Instruction for Glueing

This instruction is created to explain how to attach various equipment to your boat by using our Bengar Montage Kit. The kit includes glue, thinner, duct tape and a brush.

Step 1: Mark and Mask

Hold the equipment you want to attach against the boat and mark the space you will need with a water-based felt marker. Mask this particular space afterwards with the duct tape. Be aware to mask 0,3-0,5 cm more than you actually marked. Clean the marked spaces and and erase the marks.

Step 2: Preparation and Glueing

First of all open the glue with a slotted screwdriver. If the glue is to viscous, please use the enclosed thinner to ensure a perfect consistency. The glue evaporates quickly so you will have to use the thinner a few times, as soon as you realize that the glue is to viscous again. Lay on a first layer of glue on the marked spot on your boat and on the equipment you wish to glue by using the enclosed brush. The best way to do it is by spreading it from in- to the outside so all edges are glue-brushed. Leave it then to dry for about 15 - 20 minutes. The brush should always be kept in the glue or thinner otherwise it will harden. Don't leave the glue or thinner open or uncovered. Close it even during small breaks. Afterwards spread a second layer of glue and remove the duct tape. Lave it to dry for another 5 minutes.

Step 3: Warming and Glueing

Use a hot air gun on the maximum power level to heat up the space where you want to glue on the boat and the equipment for about 30 seconds. Take care of not holding it too long on one spot, otherwise the material could get burned. Our tip: move the hot air gun constantly so it ain’t going to stay longer on one spot than it should. You can also use a hair dryer but you have to pay attention that the spaces you want to glue become warm enough. Be aware of the fact that as soon the booth parts get connected, it will be impossible to reattach it again. After the glueing of the equipment to the boat you should use a little drum or bottle to roll over the glued space to avoid air bubbles and make sure it is connected perfectly.

Step 4: Drying Period

Now you should leave the boat to dry for at least 24 hours so the glue can harden. Leave the glued space smooth and even. If you fold the boat while the drying period it could happen that the equipment hardens in an buckled position.


  • Broschüre
  • You can find here the latest brochure about the whole range of Railblaza products - online browse or download as PDF

    Browse   |   PDF Download

In Scope of Delivery

  • 1 x Rod Holder II black
  • 1 x Ribport black
  • 1 x Glue
  • 1 x Thinner
  • 1 x Brush
  • 1 x Duct Tape

Technical Data

Part Number 03-0007-11
Barcode 0700736970812
Weight 0.68 kg
Product Weight 0.5 kg
Size Nein
Manufacturer Railblaza
Made in New Zealand
Delivery time 3-5 Days
Mounting Glue
Material Soft & Hard Plastic
Color Black
  • Set: Rod Holder II + Ribport + Glue Kit, Railblaza boat equip. Black 03-0007-11
  • Price: €58.00 - In stock
  • Brand: Railblaza
  • Color: Black

Please wait...

{{var product.name}} wurde in den Warenkorb gelegt


Continue shopping View cart & checkout Jetzt bezahlen

{{var product.name}} wurde aus dem Warenkorb entfernt


Continue shopping View cart & checkout
Um Ihnen einen optimalen Service auf unserer Webseite zu bieten, verwenden wir Cookies zur Verbesserung der Funktionalität sowie zu Analysezwecken. Durch die weitere Nutzung dieser Webseite erklären Sie sich damit einverstanden. Weitere Details zu den eingesetzten Cookies, ihrer Verwendung und zur Änderung der Cookie-Einstellungen finden Sie in unseren Hinweisen zum Datenschutz.