Set: Echo Sound Holder incl.2 Rod Holders for Inflatables boat + Glue Kit, EC-K2

Availability: In stock

Incl. 19% VAT, Excl. shipping
Delivery time 3-5 Days
Shipping - GER : 4,90 €

More Views

  • Angelboot mit Echolot
  • Echolot auf Schlauchboot platzsparend
  • Echo Sound Holder on PVC inflatable boat
  • Sonar and Echo sound mount on a PVC dinghy
  • PVC rail to fasten a sound base
  • Sonar Echo sound holder for inflatable boats
  • Sonar fixed on a fishing boat
  • Inflatable boat for fisher with accessories
  • Wie ein Echolot auf ein Schlauchboot befestigen
  • 2 grüne Schienen
  • 2 gray PVC band - mount for sonar and rods
  • 2 black pvc bands to hold Sounder
  • 2 red PVC stripes - holder for RIB boat Echosounder
  • 2 blue pvc straps to hold a sonar mount
  • PVC Glue Kit
  • Instruction to glue on a PVC boat


* Required Fields

How to install an Echo Sound Mount on an inflatable boat

Product Description

Echo Sound Holder for inflatable boat

To secure an Echo Sound on any inflatable fishing boat. We developed this Echo-sound mount especially for fisherman, making it adjustable on the boat and adding on the side 2 PVC rod holders. Naturally we considered a secure place where to stove the necessary battery. To make it demountable and adjustable we use the same solution we use for our adjustable seats, 2 PVC rails to be glued on any fisher boat on witch hanging with our slide-in-supports, the Echo mount. So now....we just wish you merry fishing.

Extra: shelf for battery.
Material: Wood and PVC.
Lower shelf: 17,5 cm long 10 cm wide.
Upper tray surface: 40 cm long 19, 5 cm wide.
Distance of rod-slot openings: 25 cm.

2 x PVC Tracks for Fastening seat bench and Echo Sound mount 40cm

Our PVC tracks are designed to slide into our universal supports to make your equipment on board stable but adjustable. This convenient and light solution is ideal to make your boat more comfortable and light at the same time. Another advantage of this product is that once you fold your boat it won't keep extra space. Extremely light solution to make your accessories on board movable but firmly fixed to your inflatable boat.

For these tracks we use the same PVC of our inflatable vessels Valmex 7318 Mainstream.

2 x supports for adjustable seat bench - PVC Tracks holder

Once fixed this support to a seat (or to an echo-sound mount) it's enough to let slide into it our PVC tracks in order to fix the desired equipment to any inflatable boat. This system has been proven over the last years, showing off many advantage: your equipment is at the same time stable and adjustable on your inflatable boat. With a weight of only 122g it's a great enhancement to fix a variety of equipment to any inflatable PVC boat. Necessary is a rigid surface where to fix the support with screws to your equipment.

Professional 2-components glue for PVC inflatable boats - Kit

The glue kit is enough to paste 8 x RibPorts or 8 x D-rings.

This professional adhesives is the same we use to manufacture our inflatable crafts. The glue is specifically developed for nautical purposes and extremely easy to handle or use. An absolute must for a perfect, durable and resilient reparation of any inflatable PVC boat or the new installation of any boat equipment you could need on your PVC inflatable dinghy. Starting from now the installation of new fishing and navigation accessories on your inflatable boat, from navigation lights to rod holders or maybe new adjustable seats, is really a simple job. This adhesives is developed to paste PVC to PVC, PVC to metal and PVC to wood. This user friendly product allows you to install any nautical equipment directly on the boat in a matter of minutes. PVC Glue 50 ml + PVC Glue Hardener 50ml = 100ml Specific PVC Glue.

Instruction for Glueing

This instruction is created to explain how to attach various equipment to your boat by using our Bengar Montage Kit. The kit includes glue, thinner, duct tape and a brush.

Step 1: Mark and Mask

Hold the equipment you want to attach against the boat and mark the space you will need with a water-based felt marker. Mask this particular space afterwards with the duct tape. Be aware to mask 0,3-0,5 cm more than you actually marked. Clean the marked spaces and and erase the marks.

Step 2: Preparation and Glueing

First of all open the glue with a slotted screwdriver. If the glue is to viscous, please use the enclosed thinner to ensure a perfect consistency. The glue evaporates quickly so you will have to use the thinner a few times, as soon as you realize that the glue is to viscous again. Lay on a first layer of glue on the marked spot on your boat and on the equipment you wish to glue by using the enclosed brush. The best way to do it is by spreading it from in- to the outside so all edges are glue-brushed. Leave it then to dry for about 15 - 20 minutes. The brush should always be kept in the glue or thinner otherwise it will harden. Don't leave the glue or thinner open or uncovered. Close it even during small breaks. Afterwards spread a second layer of glue and remove the duct tape. Lave it to dry for another 5 minutes.

Step 3: Warming and Glueing

Use a hot air gun on the maximum power level to heat up the space where you want to glue on the boat and the equipment for about 30 seconds. Take care of not holding it too long on one spot, otherwise the material could get burned. Our tip: move the hot air gun constantly so it ain’t going to stay longer on one spot than it should. You can also use a hair dryer but you have to pay attention that the spaces you want to glue become warm enough. Be aware of the fact that as soon the booth parts get connected, it will be impossible to reattach it again. After the glueing of the equipment to the boat you should use a little drum or bottle to roll over the glued space to avoid air bubbles and make sure it is connected perfectly.

Step 4: Drying Period

Now you should leave the boat to dry for at least 24 hours so the glue can harden. Leave the glued space smooth and even. If you fold the boat while the drying period it could happen that the equipment hardens in an buckled position.

In scope of delivery

  • 1 x Echo Sound Holder with 2 rodholders
  • 2 x 40 cm tracks in various colors
  • 2 x track holder (already attached to the holder)
  • 1 x Glue
  • 1 x Thinner
  • 1 x Brush
  • 1 x Duct Tape

Technical Data

Part Number EC-K2
Barcode 0700736970447
Size 40 cm x 19, 5 cm
Delivery time 3-5 Days
Weight 2.5 kg
Product Weight 1.87 kg
Made in Ukraine
Manufacturer Bengar
Mounting Glue
Material Wood
Color Darkgreen

Please wait...

{{var}} wurde in den Warenkorb gelegt

Continue shopping View cart & checkout Jetzt bezahlen

{{var}} wurde aus dem Warenkorb entfernt

Continue shopping View cart & checkout
Um Ihnen einen optimalen Service auf unserer Webseite zu bieten, verwenden wir Cookies zur Verbesserung der Funktionalität sowie zu Analysezwecken. Durch die weitere Nutzung dieser Webseite erklären Sie sich damit einverstanden. Weitere Details zu den eingesetzten Cookies, ihrer Verwendung und zur Änderung der Cookie-Einstellungen finden Sie in unseren Hinweisen zum Datenschutz.